 |
|
|
|
|
|
 |
 |
||||
| 0 1 2 3 4 5 6 7 8 9 10 11 12 Download Zipped Tutorial | |||||
 |
|||||
|
Select the shape that contains the winder. Apply a Circular fill. Center the fill over the center of the dial and drag the fill path arrow to middle of the winder. Add an additional color (E ) and end the fill with color A.
Duplicate the shaft from the top stop/start button. Stretch it a bit and put behind the winder. Copy the fill from the stop/start button (Ctrl c). Select the winder shape and Paste Attributes (Ctrl Shift a). Drag the ends of the fill path arrows to make the fill vertical. Convert the small blended rectangles on the winder to editable shapes and ungroup them. Apply the flat colors shown above left.
Create a linear fill and apply it to one of the full rectangular link shapes (the link shapes are grouped so you will need to Ctrl click to select them individually. Copy the fill and Paste Attributes (Shift Ctrl a ) to the other link shapes. Adjust the fill path arrow on the modified link shapes as shown.
Make duplicates of the top and bottom link shapes. Change the fill for all shapes to 50% black. Ungroup the link shapes and apply a Rounded, Inner Bevel, Size: 5. Select the top link shapes and Arrange > Create Bitmap Copy... Leave all settings as is and press Create. Center the bitmap over the link shapes and apply a Flat, Brightness transparency. Group the bitmap and the link shapes. Repeat this step for the bottom link shapes.
|
|||||
|
|
|||||
