The Xara Xone Workbook
Page 4
H   1   2   3   4    5   6   Download Zipped Tutorial  
Preview Xara X1 - Xara Picture Editor

The XPE Enhance options (Ctrl e).

Xara X1 Picture Editor - The Enhance options

The four sliders are:

Brightness This increases the lightness or darkness of the selected image. Moving the slider to the left makes the image darker, moving the slider to the right makes the image lighter.

Saturation Increases or decreases the amount of color in the image. Moving the slider to the left decreases the saturation. Moving the slider to the right increases the saturation. Moving the slider a lot to the right creates a garish florescent appearance.

Contrast The Contrast slider when moved to the right makes the darks darker and the lights lighter. When moved to the left of center, the darks become lighter and the lights become darker. Most scanned and digital camera images can benefit by a slight increase in contrast.

NOTE: The slider settings for these three settings has a range of +50 to -50. You can enter a higher value in the text entry box up to +100 to -100. In the case of Saturation, -100 creates a grayscale image with 0% color.

Sharpness When moved to the right, this slider sharpens the image. When moved to the left, it blurs the image. A small amount of sharpness can improve a slightly out of focus image. Too much sharpness creates a grainy look.

The Enhance option buttons include:

Auto Enhance This option examines the image and tries to compensate for what it thinks the image should look like.

Compare Compare removes and reapplies the current settings letting you see the before and after.

Xara X1 Picture Editor - The Enhance options

The two photos above (of my friend Barry McCormick offering a bottle of wine to a painted lady) illustrate the effects of Auto Enhance. XPE has increased the Brightness to 20, the Saturation to 2, the Contrast to 10 and the Sharpness to 20. While this is an improvement, the image is still too dark.

This version was edited manually with these settings: Brightness 35, Saturation 5, Contrast 25, and Sharpness 20. This represents a small improvement on the auto enhanced image. I also used another technique which I will cover on the next page.

 

Crop

The cropping options let you visually determine a cropping area and then crop the image to that area. Unlike Xara's  Combine Shapes... Intersect Shapes or Arrange > Apply ClipView options, which retain the full image and just mask it, Crop deletes all of the image outside the cropped area. Remember, you can undo the changes, but only after you close the Picture Editor.

When you open the Crop dialog, you have the option to Lock Aspect. This option lets you crop the image to the same height to width aspect ratio (either  Current— the image's existing height to width ratio, or to 3:2 or 4:3). With Lock Aspect unchecked, you can crop to any configuration.

Click and drag on the preview image to designate the area to be retained. The new image is displayed in full color while the area to be cropped is shown much lighter. When you are satisfied with the cropping, press Crop . Press Un-crop if you are not happy with the results. Press Clear to remove the cropping grid.

You can stretch the cropping grid by dragging any of the 8 small white squares (called control handles) that surround the image. The corner squares scale the cropping grid proportionately if Lock Aspect is enabled.

When you have cropped your image, you need to press the red check mark icon (Accept and Return to Xara).

 

 

 

< LAST PAGE       H   1   2   3   4   5   6       NEXT PAGE >